How to Identify the Water Quality of Your House in a Simple Way?

As an RO Water Purifier Manufacturer, share with you.

how to buy? buy what? I think it's easy to say, one model per price.

Zero Install Hot and Cold RO Water Dispenser

Instead, I feel that to buy a water purifier, I must first understand the water quality at home? What is the water purifier equipment? How about these devices? What should I pay attention to when buying?

A simple way to identify your water quality:

1. Look: Fill a glass of water with a glass, look at the light to see if there is any fine substance suspended in the water, and then let it stand for three hours to observe whether there is sediment at the bottom of the cup. If there is, it means that the suspended impurities in the water are seriously exceeding the standard.

2. Smell: Take a glass of water, and then use your nose to smell it. If you can smell the bleach (chlorine), it means that the residual chlorine in the tap water exceeds the standard.

3. Product: Taste boiled water, if there is astringent taste in the mouth, it indicates that the hardness of the water is too high.

4. Check: Check the kettle at home, is there a layer of yellow dirt on the inner wall? If there is, it also indicates that the hardness of the water is too high (the content of calcium and magnesium salts is too high)

Will water purification filtration affect water supply pressure?

As long as there is a pressure loss in filtration, the higher the filtration accuracy, the greater the pressure loss. This is a physical law.

Generally, the tap water pipe network can reach a pressure of 3 kg. We recommend that the pressure of the RO reverse osmosis direct drinking water should not be lower than 3KG, otherwise it is recommended to install a booster pump. If there is no RO reverse osmosis, 2-2.5KG water pressure is no problem. 

Our company also sells Zero Install Hot and Cold RO Water Dispenser, please contact us.